ELIMINATOR Sound Activated w/40 Crisscrossing Colored Beams

The E-108 is a popular & powerful effect that has revolutionized the lighting industry for years. It is a powerful effect for both clubs & mobile DJs. This unit features 2 x 120v 300w Lamps (EL-64514) that respond sound actively via its internal microphone. The effect creates a dramatic cluster of 40 multi-dichroic colored beams crisscrossing throughout the room. Due to its oval lens design, the coverage is enormous. You cannot go wrong w/the E-108. Dimensions: 16"H x 11"W x 14.5"D Weight: 24 lbs. * Lamp: 2 x LL-64514 120V 300W * Weight: 24 lbs. * Size: 16"H x 11"W x 14.5"L * Fuse: 10 Amp * Supply Voltage: 120V * Working Position: Any Safe position * Duty Cycle: 10 min. on,10 min. off * Colors: Multiple Colored Lenses * Warranty: 90 Days The E 108 is a powerful effect for clubs & dj's. The E 108 creates a dramatic cluster of 40 multi-dichroic colored beams. This unit features an internal microphone that allows the beams to be triggered by sound. The E 108's beams bounce up & down to the beat of the music. The E 108 is ready to be hung or set on the ground in a safe position. When mounting this unit to truss be sure to use a clamp. Plug the unit in to a standard 110 wall outlet. After plugging the unit in, the fixture will react to the beat of the music via the sound active internal microphone. The unit has a sensitivity knob on the rear of the unit that makes more or less sensitive to sound. Turing the knob in clockwise direction will make the unit more sensitive to sound. The unit requires sound to activate the movement. Lamp Replacement: Disconnect the units main power supply. Unscrew & remove the thumb screws on the top of the fixture. Remove & replace the bulbs. Reassemble & reconnect the power supply. Be sure to follow all the handling instruction that are included w/your new lamp.