Furman HR-6 Remote Mixing Station

The HR-6 Remote Mixing Station offers a great-sounding, cost effective and flexible way to provide custom mixes in Recording and live sound environments. The HR-6 is a compact six-channel, five-pot remote mixer that clamps to any MIC stand. When used with the HDS-6, the HR-6 allows musicians to customize their own Headphone or Monitor mix, and the engineer doesn't have to touch the board. The HR-6 provides four Mono pots and one Stereo pot. The four mono pots allow each User to create a custom mix of four console Channels or busses. The stereo pot will most often be used for a main control room mix, or for a stereo effects return. The HDS-6 / HR-6 Audio Distribution System and HR-6 Remote Mixer are designed for high-end audio applications, yet are affordable enough for home studios and general live sound applications.

Input Impedances: 20 Kohms

Sensitivity: Variable, -10 to +4 dBu for rated output.(adjustable with trimpot on each input)

Power Output: 400 mW at 32 ohms (200 mW at 600 ohms, 500 mW at 100 ohms) from 20 Hz to 20 KHz.

Connectors: Inputs: 1/4" phone, balanced or unbalanced

Outputs: RJ-45 jacks

Distortion: 0.008% THD at full rated power at 1 KHz; 0.05% THD 20Hz to 20 KHz.

Dynamic Range: Greater than 96 dB

Frequency Response: +0, -1 dB from 20 Hz to 20 KHz, 400 mW output

Power Requirements: 120 VAC, 60 Hz, 20 Watts

Dimensions: 1.75" H x 19" W x 7.25" D

Weight: 1.25 lbs.