Klipsch RF-62 Floorstanding Loudspeaker

Because compromise isn't an option, the Reference Series RF-62 floorstander offers up everything you've never heard before in your favorite Music and movies. With its superior technology and slender design, this speaker definitely stands out in the crowd. Exclusive Tractrix Horns have always been the key Component of this critically acclaimed series. In the RF-62, this technology has been refined to include improved throat geometry for a more genuine, lifelike sound. Behind the horn lies a 1-inch titanium Tweeter with a large ceramic motor structure to provide a unique combination of precision, clarity and effortless power. The RF-62 employs dual 6.5-inch woofers for a solid Bass foundation. These Cerametallic woofers with inverted copper dust caps exhibit a very high stiffness-to-mass ratio and superb damping characteristics. The RF-62's rigid cabinet offers improved internal cross-bracing to minimize panel vibrations that can Color sound and twin rear-firing ports to eliminate turbulence noise. Increased baffle ribbing in the lower panel and around the horn mouth dramatically improve acoustics across the sonic range. For signal purity and perfect Driver integration, the crossover on the RF-62 features the finest components and Klipsch custom internal wiring. Available in a black vinyl finish, the RF-62 comes with a low-diffraction, magnetically attached grille to further accentuate the elegance of this speaker.

FREQUENCY RESPONSE: 38Hz-23kHz +/-3dB

POWER HANDLING: 125W RMS / 500W Peak

SENSITIVITY: 97dB @ 2.83V / 1m

NOMINAL IMPEDANCE: 8 Ohms compatible

HIGH FREQUENCY DRIVERS: 1" (2.54cm) Titanium diaphragm Compression driver mated to 90x60 square Tractrix Horn

HIGH FREQ CROSSOVER: 1800Hz

LOW FREQUENCY DRIVERS: Dual 6.5" (16.5cm) Cerametallic cone woofers

ENCLOSURE TYPE: Bass-reflex via dual rear-firing ports

Unit Dimensions - HEIGHT: 40.6" (103.1cm) (w/feet) x WIDTH: 8.5" (21.6cm) x DEPTH: 15.5" (39.4cm) / WEIGHT: 54lbs (24.5kg)

FINISH: Black Ash woodgrain vinyl

Requires Speaker wire for connection (not included)