Pioneer TS-W308D2 12" Champion Series Subwoofer w/ 1400 Watts Max. Power

Introducing the Champion Series Subwoofer, which feature an all-new design and look. The subwoofer has a maximum power Output of 1400 watts.

For extraordinary performance, the cone is made of Pioneer's IMPP with Aramid Fiber, and a dual mass magnet assembly for higher magnetic force, and more power. The wire terminal is spring-loaded and can take up to 8-gauge wire.

A sub's Surround plays a key role in its overall performance. In order for Bass response to be clear and tight, the surround has to respond evenly around its entire circumference without flexing or puckering, even at high volume levels. That's why Pioneer created a surround consisting of two layers of urethane, with a layer of interwoven fiber between them. It's strong, stable, and it reduces distortion.

To accurately drive and control its voice coil, a speaker needs a magnet and a pole yoke, to create magnetic force. The bigger or denser the magnet, the greater the magnetic force. The greater the magnetic force, the greater the power and control that's exerted over the voice coil. To make this happen in a big way, Pioneer uses a Dual Mass Magnet assembly (weighing in at 83oz.) to significantly increase the magnetic force. So, you get bigger and more accurate music. And yes, they even included a magnet cover.

Why do they use Spring-Compression Binding Posts, instead of standard Speaker wire terminals? So your speaker wire never shakes loose due to vibration (either from the road or from your music). When you insert the wire, the connector keeps a constant pressure on it. And it won't let go. These binding posts will accept wire as large as 8-gauge.

TS-W308D2 provides two voice coils, each either at dual 2 or dual 4 ohms. So you can use a low-impedance amp to produce much bigger, much more powerful bass. More options, more power: that's what DVC is all about.

Watts Nominal Power handling 400 Watts

Frequency response 20 ~ 180Hz

Sensitivity D2 (90dB) D4 (92dB)

Ohm Rating D2: (1 or 4 ohm) D4: (2 or 8 ohm)

Recommended Enclosure 0.85 ~ 1.75 Cubic Feet

Dimensions: 327 mm x 172 mm, 153 mm (mounting depth)