Wilson Electronics, Inc. DB Pro Cell Booster Kit

The Wilson Electronics DB Pro Cell Booster Kit can only boost a cellular signal that exists by your service carrier. If there is no signal available, it can not boost it.

The DB Pro cellular signal booster is Wilson’s dual-band (800 &1900 MHz) wireless amplifier for use in homes, offices and other buildings. The DB Pro significantly improves voice and data performance for multiple cell phones and data cards simultaneously, and works with all major North American cell phone carriers, which include both Cellular (824-894 MHz) and PCS (1850-1990 MHz) carrier frequency bands. This 65 dB in-building booster combines high performance with ease of installation, and can be used with an outside Omni-directional gain antenna with multiple mounting options that eliminates researching cell tower locations and antenna orientation.

The outside antenna is placed in the area of best signal, collects it and sends it through a cable to the pre-amplifier. The pre-amplifier boosts the signal before sending it to the amplifier. The main DB PRO amplifier boosts the signal further, and then sends the boosted signal through a cable to the inside antenna. This provides an area of improved signal that can be used by up to 15 phones or data cards simultaneously. Please note: Antennas boost faint but already existing signals from your phone service carrier. If there is no service, there is nothing to boost.

Kit Contents:
Included in this kit are the following items:

Wilson 801262 DB PRO 62dB Amplifier

External 304475 75 ohm yagi antenna - details

Internal 301155 panel antenna - details

20ft, 30ft and 50ft RG6 standard satellite-type coaxial cable and a connector - details. This allows you customize the length you need, i.e. 50 ft either side or the amplifier, 80ft/20ft, or 70ft/30ft
Specifications:

Frequency Dual Band

Max coverage area 5,000 sq ft

Type Wireless

Gain (up / down) 60dB / 60dB

Impedance 75 ohm

Linear Output Power (up / down) +31.7dBm / +31.7dBm

Noise figure 3.5 dB nominal

Power Requirements 110-240V AC, 0.6A max

Dimensions (inches) 6.2 x 4.2 x 1.5

Frequency detail (up/down) 824 - 849 MHz / 869 - 894 MHz and 1850 - 1910 MHz / 1930 - 1990 MHz

Connector Type F Female / F Female