Rane MP 44 Club Mixer

The MP 44 Mixer supports DJ creativity, while club Sound quality and equipment remain intact. The MP 44s unique set of features combine with superior Audio performance to provide unparalleled value.

Two Auxiliary Inputs are provided. Aux Input A is unbalanced, while Aux Input B is balanced. Each Input features off to +6 DB Level controls.

Two Auxiliary Outputs are provided. Aux Output A is unbalanced. Aux Output B is balanced. Each Output features off to +6 dB Level controls. Each Output may be assigned Pre-Master Effects loop, Post-Master Effects loop or Post Master Effects loop plus Mic. These features provide the flexibility to use the Aux Outputs for Recording or additional zones.

High performance VCA level controls are used for House and Booth level, providing very low travel noise and long life. A Master left/right balance control and recessed Master Mono Switch with LED indicator are provided.

A high-performance Master Limiter with true RMS detectors limits both House and Booth maximum levels. The rear panel threshold control range is ±20 dBu. Threshold indicators are provided on both the front and rear panels.

Two Mic Inputs:

Combination XLR / TRS input jacks

Full range fader control

3-band tone controls

Effects insert with Engage switch

12 dB auto Booth Ducking

Blue Mic-On indicator

Main Mic:

Studio-grade Integrated Microphone preamplifier

Gain range 15 dB to 60 dB

Selectable 12 volt phantom power

Aux Mic:

Balanced input

Mic or Line-level input

Mic Gain Range 30 to 60 dB

Line Gain Range 0 to 30 dB

Monitoring:

An improved Headphone monitor allows Panning between Cue and House signals

Engage the Monitor Mono switch to Pan between Mono Cue and Mono Master (pre-house fader)

MP 44 uses a high-current, low-noise headphone amplifier, of course

Versatile metering:

Stereo House output

Mono-Cue / Mono-Master

+4 dBu or -10 dBV sensitivity (switchable)

Light Trigger Output:

Balanced output (no transformer)

Rear panel Level control

MP 44 features four Input Buses:

Assignment to the A-side, B-side or Post-Crossfader

Phono/CD and Line inputs

Gain trim (±12 dB)

Overload indicator

FlexFX loop assignment

3-band full-cut Accelerated-Slope Tone Controls