Sony Xplod XM-1S Class D Slim Series Subwoofer Amplifier

If you have a small vehicle, the Slim Series XM-1S amplifier's low profile allows it to fit under most front seats. On the outside, the sleek inverted heat sink keeps vital internal components running cooler and lasting longer. Removable terminal covers keep all the wire connections protected and out of sight. The XM-1S Mono amplifier delivers 290 Watts to a single 4-ohm sub, or 500 watts to a pair of subs — plenty of power for even the most demanding subwoofers. Signal-sensing speaker-level inputs activate the amp automatically when it's connected to a factory radio, so there's no remote turn-on lead for you to install. You can adjust the Low-Pass filter to tailor the signal going to your subs, while a Bass boost adds extra punch to the lows. Switch on the subsonic filter to improve your sub's performance by removing inaudible ultra-low bass. Preamp outputs simplify setup when it's time to add another amp to your system.

Mono subwoofer amplifier for car stereos

900W Max Power

290W RMS into 4 Ohms (500 watts RMS into 2 ohms)

40Hz Low Boost Switch

15Hz Subsonic Filter

Active Thermal Control - prevents shutdown due to overheating

Line Level Thru-put - A Circuit that provides an additional output connection for the original line level Audio signal

Line & Speaker level inputs with high-level sensing turn-on

CEA-2006 Power Compliant

Ad Hoc Power into 4 ohms, THD%: 1 x 290, 1

Ad Hoc Power into 2 ohms, THD%: 1 x 500, 1

Signal to noise ratio (dB): 90dB

Frequency response (Hz): 5-300Hz

Low-pass crossover (50-300Hz, -12dB/octave)

Variable bass boost (0-10 dB at 40 Hz)

Switchable subsonic filter (15Hz, -12dB/octave)

Class-D amplifier design

MOSFET outputs and power supply

Fuse rating: 30A x 2

4-gauge power and ground leads recommended — wiring and Hardware not included

W x H x D (inches): 8-7/9 x 1-5/7 x 7-5/7

Weight (Approx.): 5.07lb

1 year Manufacturer Warranty